top of page

The Cornet88T Plus5G is a 3rd generation of ED88TPlus series High performance Tri-mode Electrosmog meter with build-in RF Field strength power meter, LF Gauss meter, and LF Electric Field meter.

Build-in Frequency counter

Support all 5G mobile frequency bands. with 5G signal frequency indicator,

Data Logging capability

Record and view the Logged Data in graphic window on the meter's LCD display. send data through USB interface to PC for analysis.

The statistical data of the received signal is collected and displayed in realtime on the LCD display.



  • Electromagnetic field strength measurement both low frequency and high frequency. 
  • Mobile phone base station radiation power density safety measurement. 
  • Telecommunications (TDMA,GSM,DECT). 
  • RF safety measurement. 
  • RF power measurement for transmitters. 
  • Wireless LAN (Wi-Fi) detection, installations. 
  • Smart meters 
  • Spy camera, wireless bug finder. 
  • Cellular/cordless phone radiation safety level. 
  • Microwave oven leakage detection. 
  • Electric and magnetic field measurement. 
  • E-field mode: measured ELF electric field strength is shown on the digital LCD display with V/m. 
  • Personal living environment EMF safety.  
  • Data logging via USB to PC connection software. 



  • Tri operation mode: RF power meter mode, LF Gauss meter mode and LF E-Field mode. 
  • RF Frequecy range: 100MHz to 8GHz (RF meter), (-65dBm to +5dBm),(0.1uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m). 
  • Build-in Real time Frequency counter (100MHz-4.2Ghz). 
  • LF1: 50Hz to 10KHz (0.1uT to 60uT)/(1mG to 600mG). 
  • LF2: 50Hz to 1KHz (0.01uT to 1uT)/(0.1mG to 10mG). 
  • E-field bandwidth of 50Hz-50KHz with sensitivity of 10v/m to 1000v/m.
  • Peak power density measurement 1.5uW/m2 to 0.58W/m2. 
  • LCD Backlight: 15 seconds auto-off and manual on/off control. 
  • LCD Histogram and bar display to display power density level. 
  • Ultra fast sampling rate 25000 times/sec. for modern digital RF pulse signals. 
  • Capture very short RF bursts signal down to 100usec. 
  • Support all non millimeter waves 5G frequency bands including the new 5G C-band 3.5GHz. 
  • 5G frequency indicator for supported 5G mobile band signals, Statistical data of detected signal on LCD display for SBM2008 recommendation. 
  • Show Both Signal level and Frequency of detected signal. 
  • Error rate: +/- 3.5dBm, LF: 20%, E-field: 25%. 
  • Support WiFi, 3G/4G phone, DECT, CDMA, 5G mobile, WiFi-6, WiMAX, GSM, Bluetooth, AC smart meter, Ham radio and IoT wireless devices. 
  • Max and Hold function, mW/m2, V/m, dBm, mG, uT. 
  • Average, Sound output, audio Alarm function. Calibration correction.
  • Earphone port.
  • Volume control.
  • USB connection for data communiation and power supply.
  • Audio Sound ON/OFF control, programmable Alarm
    triggering level. 
  • Accurate, easy to use device, excellent for personal Electrosmog exposure evaluation for living environment, such as close by Mobile phone base station. 
  • Build-in Sensing Antenna. 
  • Small, compact handheld design, 69mmX110mm. 
  • 9v Battery operated supplied.
  • Constant power option via USB.
  • Micro USB cable required (not supplied).

Cornet88T Plus 5G

    bottom of page